Price: $26.99
(as of Aug 03, 2024 05:13:08 UTC – Details)
Product Description
This thermostat plug has temperature control function and timing function. It is widely used for aquarium, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, pet breeding, heat mat, industrial equipment and other temperature-controlled system.
Features:
Heating/cooling modeCycle timing and CountdownTemperature calibrationMemory function: all current settings will be saved after power off.Reset
Specification:
Power Supply: AC 120V±15% 60HzTemperature control range: -40~248℉ (-40℃~120℃)Control accuracy: ±1%Sensor: NTC10K/B3950Output: Max 15A/120V (The relay is max 15A. Please use resistance load less than 15A, inductive load less than 2A.)Timing accuracy: MAX 10minutes
Temperature control mode
Set start temperature and stop temperature, when start temperature > stop temperature, the thermostat outlet will work in cooling mode, and when start temperature < stop temperature, it will work in heating mode. Temperature control range: -40~248℉ (-40℃~120℃), ℃/℉ convertible.
For example, set start temperature=30℉, stop temperature=35℉, heater will start to heat when measured temperature<30℉, and will stop heating when measured temperature≥35℉. And until the measured temperature drops under 30℉again, KT3100 will work again.
Timing function
F01-Cycle timer mode
The device works during ON time and stop working during OFF time. It will keep working in cycles. For example, set ON=0:05, OFF=0:02, this device will work for 5 minutes and stop working for 2 minutes, and then work again in cycles.
Please note: After setting, press and hold “MODE” for 3 seconds to start the programme.
F02-countdown ON mode
The device starts to work after CD ON time ends. For example, set CD ON=0:05, the device starts to work after 5 minutes.
Please note: After setting, press and hold “MODE” for 3 seconds to start the programme.
F03-countdown OFF mode
The device stop working after CD OFF time ends. For example, set CD OFF=0:05, the device works for 5 minutes and stop working forever after 5 minutes.
Please note: After setting, press and hold “MODE” for 3 seconds to start the programme.
F04-countdown ON/OFF mode
The device starts to work after CD ON time ends and stop working after CD OFF time ends. For example, set CD ON=0:02, CD OFF=0:05, the device will start to work after 2 minutes, then work for 5 minutes and stop working forever.
Please note: After setting, press and hold “MODE” for 3 seconds to start the programme.
Widely used for aquarium, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system.
Greenhouse
Reptile
Fermentation
Incubator
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.0 out of 5 stars
77
3.9 out of 5 stars
43
3.8 out of 5 stars
16
4.2 out of 5 stars
238
3.8 out of 5 stars
62
Price
$27.99$27.99 $17.99$17.99 $34.99$34.99 $17.99$17.99 $23.99$23.99
Function
Heating/Cooling Heating/Cooling Humidifying/Dehumidifying Heating/Cooling Heating/Cooling/Humidifying/Dehumidifying
Temperature control range
-40℃~120℃/-40℉~248℉ -58~248℉ -58~212°F -58~176°F
Timer Function
✓
X X X X
Humidity control range
20%RH~95%RH
Max Output
15A Relay Output 10A Direct Output 15A Relay Output 10A Relay Output 10A Direct Output
【Relay output, easy to use】 Plug-and-play design, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC; Output:Max 15A/120V.
【Easy to program】 Just set start temperature and stop temperature, this plug in thermostat will work in heating or cooling mode. Temperature control range:-40~248℉ (-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temeprature controller also supports temperature calibration if needed.
【Timing function】 F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.
【3m NTC probe & more function】 3m NTC 10K temprature sensor probe (Not recommended to be kept in water for more than 1 month). Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved when power is off.
【Wide Range of Application】 This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown.
